SFX Options
Special Colors effects on Points/Track
Using these options you can set the color of your track/points as a function on parameters of the recording.
Select Track/Points to override the color options and apply the color sets.
Select colorset and the parameter that will be used as a reference to apply the colorset.
Select Track/Points to override the color options and apply the color sets.
Select colorset and the parameter that will be used as a reference to apply the colorset.
It’s possible o modify the file Styles.txt to add/modify colorsets
File format is very simple: Name of the colorset, color data (each row), end of the colorset ‘———’
File format is very simple: Name of the colorset, color data (each row), end of the colorset ‘———’
Example:
———-
SimpleRGB – name of the colorset
ffff0000 – color data
ff00ff00 – …
ff0000ff – …
———- – end
$$$$$$$$$$ – end of file
———-
SimpleRGB – name of the colorset
ffff0000 – color data
ff00ff00 – …
ff0000ff – …
———- – end
$$$$$$$$$$ – end of file
2 hex chars representing opacity : ff = 100%, 00 = transparent
3 pairs of chars representing RGB components in the following order: BLU, GREEN, RED
3 pairs of chars representing RGB components in the following order: BLU, GREEN, RED
It’s now possible to create colors combinations with fixed thresholds.
Here is an example.
Here is an example.
Fixed-RGBY
[-],ffff0000 -> Blue
[5],ff00ff00 ->Green
[10],ff0000ff -> Red
[12],ff00ffff -> Yellow
[-],ffff0000 -> Blue
[5],ff00ff00 ->Green
[10],ff0000ff -> Red
[12],ff00ffff -> Yellow
The first parameter represents the value; the second one is the color/opacity combination to be applied
In the example the color ffff0000 (blue) is applied to values lower than 5
The color ff00ff00 (green) is applied to values between 5 and 10
The color ff0000ff (red) is applied to values between 10 and 12
The color ff00ffff (yellow) is applied to values greater than 12.
In the example the color ffff0000 (blue) is applied to values lower than 5
The color ff00ff00 (green) is applied to values between 5 and 10
The color ff0000ff (red) is applied to values between 10 and 12
The color ff00ffff (yellow) is applied to values greater than 12.
Measurements unit of the values is the same selected in the options.
It’s possible to edit the file Styles.txt wit hany text editor.
To reload the modified file click on Refresh button (otherwise the program will ignore your modifications!)
It’s possible to edit the file Styles.txt wit hany text editor.
To reload the modified file click on Refresh button (otherwise the program will ignore your modifications!)
-
Filters
Save Filter: save filter configuration into a file.
Load Filter: load filter configuration from a file.
Clear Filters: clear all the filters.
Load Filter: load filter configuration from a file.
Clear Filters: clear all the filters.
(Check the Measurements unit options before setting up your filters)
• Fix Validity – Filter by fix validity. Only if applicable! (i.e. applicable in NMEA streams, not applicable in POI files)
• Min Points Distance – Minimum distance between consecutive points.
• Max HDOP
• Min/Max Speed
• Min/Max Altitude
• Min/Max Latitude-Longitude – degrees
• Distance from Lat/Lon – Define maximum distance from point (specified by Lat/Lon). Selecting “Invert” the minimum distance from the points is considered.
• Start Time / End Time – Specify time interval
• Min Points Distance – Minimum distance between consecutive points.
• Max HDOP
• Min/Max Speed
• Min/Max Altitude
• Min/Max Latitude-Longitude – degrees
• Distance from Lat/Lon – Define maximum distance from point (specified by Lat/Lon). Selecting “Invert” the minimum distance from the points is considered.
• Start Time / End Time – Specify time interval
A new option is available: “Time Corr”
Using this option it’s possible to apply a correction to the time of the track (expressed in hours).
Usually UTC time is used in the log files. Using this option it’s possible to correct the time to your Local Time.
Warning: this opyion may coflict with time correction in Georeferencing Images.
Using this option it’s possible to apply a correction to the time of the track (expressed in hours).
Usually UTC time is used in the log files. Using this option it’s possible to correct the time to your Local Time.
Warning: this opyion may coflict with time correction in Georeferencing Images.
Measurements units
Chosen measurements units will be used for filters and in the destination descriptions file.
I.e.: setting “Meter per Seconds[m/s]” all the speed in the destination file will be expressed in meter/s and the value of the speed filter setting will be considered to be expressed in meters/s.
Command Line Interface
C_GPS2KML can also be used from Command Line (useful for batch processing and integration with other tools).
type "C_GPS2KML.exe --help" for a list of options.
If only the filename is provided for the conversion, the program will use the last used option set using the GUI. In this way, you can setup easily your conversion options using the GUI and have them ready for batch processing.
Examples:
>C_GPS2KML.exe -f my_log.nmea
or
>C_GPS2KML.exe -f my_log.nmea
will produce an output using the last saved configuration
>C_GPS2KML.exe -f my_log.nmea -P --ph -T --tc 255 0 0
Will ignore your last saved configuration and generate the output file according to the options provided:
-P Generate Points
--ph Use point true altitude (not clamped to groud)
-T Generate Track
--tc 255 0 0 Set track color red (R = 255, G= 0 , B=0)
Continua...
